Bend Fixtures

Bend fixtures are used to determine the flexural properties of rigid and semi-rigid materials. They are available in a variety of capacities, support diameter and widths, spans, and 3 or 4 point configurations. Choose a model based on the size of your samples and their strength.

FF-2.5T
Capacity: 2.5 kN Maximum Span: 150mm Support Width: 30mm Upper Support Radius: 1, 1.5, 2, 3.2, or 5 Lower Support Radius: 1.5mm & 2.5mm, 2mm & 3mm, or 3.2mm & 5mm
FF-2.5X (Interchangeable Diameter Supports)
Capacity: 2.5 kN Maximum Span: 150mm Support Width: 30mm Fixture includes two sets of insert diameters Support Radius: 1, 2, 3, 4, 5, 6, 6.35, 8, 10, 12, 12.7mm
FF-2.5XW (Wide Support Width)
Capacity: 2.5 kN Maximum Span: 150mm Support Width: 100mm Interchangeable Diameter Supports Fixture includes two sets of insert diameters Support Radius: 1, 2, 3, 4, 5, 6, 6.35, 8, 10, 12, 12.7mm
FF-2.5T-4PT (Four Point)
Capacity: 2.5 kN Maximum Span: 150mm Support Width: 30mm Upper Support Radius: 1, 1.5, 2, 3.2, or 5 Lower Support Radius: 1.5mm & 2.5mm, 2mm & 3mm, or 3.2mm & 5mm
FF-10T
Capacity: 10 kN Maximum Span: 150 or 300mm Support Width: 30mm Upper Support Radius: 1, 1.5, 2, 3.2, or 5 Lower Support Radius: 1.5mm & 2.5mm, 2mm & 3mm, or 3.2mm & 5mm FF-10T-4PT – 4 Point Bend Option Available
FF-50T
Capacity: 50 kN Maximum Span: 360, 500, 600, 700, 800, 900, 1000, 1100, or 1200mm Support Width: 100mm Upper Support Radius: 10, 20, or 30mm Lower Support Radius: 10, 20, or 30mm FF-50T-4PT – 4 Point Bend Option Available
FF-100T
Capacity: 100 kN Maximum Span: 360, 500, 600, 700, 800, 900, 1000, 1100, or 1200mm Support Width: 100mm Upper Support Radius: 10, 20, or 30mm Lower Support Radius: 10, 20, or 30mm FF-100T-4PT – 4 Point Bend Option Available

Customers should contact ADMET for more information, to order products or to discuss special needs with an ADMET engineer. Please call 800-667-3220, email OR click on the Ask an Engineer button to submit your information request.