ADMET Online Troubleshooting
Gauge Buster Digital Indicator

Problem Description

Not holding peak load

Threshold AND/OR Sample Break Settings

Applying Load too quickly after taring Gauge Buster

Not tracking load while machine actually loading and breaking sample

Threshold AND/OR Sample Break Settings

Applying Load too quickly after taring Gauge Buster

Rate bar not being displayed

Threshold AND/OR Sample Break Setting

Applying Load too quickly after taring Gauge Buster

Cannot transmit data to WinCom/WinCom Plus

WinCom is not open

Not initiating transfer from Print menu in Gauge Buster

Serial Cable between Gauge Buster and Computer is not connected

Serial cable incorrect

Proper com port is not selected in WinCom

Baud Rate settings in Gauge Buster and WinCom do not match

Cannot automatically transmit XY data to RS232 at the end of test

WinCom/WinCom PLUS software is not open

Action not selected on Gauge Buster

Serial Cable between Gauge Buster and Computer is not connected

Serial Cable incorrect

Proper com port is not selected in WinCom

Baud Rate settings in Gauge Buster and WinCom do not match

Cannot automatically transmit test result to RS232 at the end of test

Action not selected on Gauge Buster

Serial cable between Gauge Buster and Computer is not connected

Baud Rate setting on receiving com port

Cannot stream live XY data to RS232 (Version 0.6s and earlier)

Action not selected on Gauge Buster

Baud Rate Setting on receiving port

Serial cable between Gauge Buster and Computer is not connected

Cannot stream live XY data to RS232 (Version 0.7a and later)

WinCom LIVE software is not open

Action not selected on Gauge Buster

Serial Cable between Gauge Buster and Computer is not connected

Load reading wrong

Calibration

Analog/Digital Electronics

Excitation Voltage bad

Load Transducer Cable

Load Transducer

Load reading unstable

Calibration

Analog/Digital Electronics

Excitation Voltage bad

Load Transducer Cable

Load Transducer