ADMET’s environmental chamber is a two-in-one system (furnace/oven and freezer) that can be configured for use with single or dual-column universal testing machines. The F-280DT environmental chamber is the standard configuration and can test materials up to 350˚ C. Either LN2 or CO2 cooling gases can be used with the chamber. Standard dimensions are 220 x 220 x 580 mm (8.6 x 8.6 x 22.8 in). Environmental chamber dimensions and temperature ranges can be customized upon request.
One of the more common applications of the F-280DT Environmental Chamber is for tensile testing at elevated or high temperatures.
ADMET environmental chambers come with their own controller and can also be set up to communicate with MTESTQuattro™. Chambers come with slide rack rails that allow the chamber to be pulled out of the machine when not in use. The 4-glass-layered door window is heated to reduce icing and condensation during low-temperature testing. An optional interior or door light can also be added. A full line of complementary grips, pull rods and extensometers to be used with the environmental chambers is available. The optional accessories allow for a variety of testing within the furnace/freezer, from tensile testing, fatigue testing, compression testing, flexural testing (bending), and other custom test fixtures.
| Temperature Range | -80˚ C up to +280˚ C or up to +350˚ C |
| Body | Stainless steel |
| Internal Dimensions (w x d x h) | 220 x 220 x 580 mm (8.6 x 8.6 x 22.8 in) |
| External Dimensions (w x d x h) | 360 x 480 x 760 mm (14.2 x 18.9 x 29.9 in) |
| Heating Power | 2.3 kW (220 Volt) |
| Front Door Viewport | — 4 glass layers with heating coils to remove ice |
| Windows Dimensions (w x h) | 130 x 500 mm (5.1 x 19.7 in) |
| Standard Cooling | LN2 cooling module |
| Scope of Delivery | — 1 chamber with Omron controller |
For more information, read our informative post on high- and low-temperature testing.
Just Ask!
Have questions about using environmental chambers with your testing application?
