This post will help guide you through compression platen setup and operation on your universal testing machine.
More information on our compression platen offerings can be found here.
Installing the Platens
- Depending on the capacity, ADMET compression platens come with either 15.9mm (5/8”) or 31.8mm (1 ¼) female eye ends. Place the female eye end of fixture onto base male eye end. If adapters are used, mount the adapters first, then follow the steps below.
- Align pin holes of male and female eye ends, insert pin.
- Using a spanner wrench, tighten locking nut against platen to eliminate axial play (wobbling) between platen and eye end.
- Repeat for second platen.
Platen Usage
- Place test sample on center of lower platen to avoid off-center loading.
Maintenance
- Clean platens after use. Wipe away sample fragments or residue.
- Platens do not require lubricant.
- If platens become worn or damaged, contact ADMET for a replacement set.
By: Kevin Weiler | Published on: August 9, 2016 | Last Updated: January 6, 2026
Just Ask!
Have a question about ADMET compression platens?
We’re ready to help!
Testing Guides
Fatigue Testing Basics: Principles, Methods, and Applications
Read about fatigue testing, cyclic loading, stress-life, strain-life, and more.MTESTWindows to MTESTQuattro Upgrade
ADMET offers MTESTQuattro upgrade packages to upgrade testing machines previously retrofitted with MTESTWindows.Medical Adhesive Testing Basics
Medical adhesives are specialized substances used to bond medical devices, tissues, or other components together. They must comply with strict biocompatibility requirements and are vital in surgeries, wound care, and medical equipment manufacturing.
