Define the cutting edge of material research and development with ADMET Universal Testing Machine.
ADMET testing systems evolve to meet your testing needs
Quantitative material research and development strategies require hard numbers to base material or product direction. When innovation leads you where no one has been before, it may be necessary to modify existing or engineer a new piece of testing equipment in order to obtain relevant empirical data. Our engineering team works hand in hand with you to design specialized testing systems to meet your unique requirements. Whether you are increasing the flexural strength of surgical grafts, developing light weight windshields, compounding wider temperature range elastomer sealing systems or advancing the next generation of aerospace composites, ADMET testing machines offer customized, accurate and reliable performance you can count on.
The Right Solution for Your Material Research Needs
ADMET material testing machines can perform tension, compression, flexure, torsion, axial-torsion, and planar biaxial tests in order to quantify and evaluate the static and dynamic characteristics of your samples. In addition to our standard product line, we also offer engineered solutions customized to meet your unique material research and development testing requirements.
For information on our standard product lines:
- eXpert 7600 Series Single Column Electromechanical Test Machines
- eXpert 2600 Series Dual Column Electromechanical Test Machines
- eXpert 1600 Series Dual Column Servo Hydraulic Test Machines
- eXpert 5900 Series Modular and Fatigue Rated Electromechanical Test Machines
- eXpert 3000 Series Torsion Test Machines
- Grips, fixtures, environmental baths and accessories
For a custom engineered solutions contact a sales engineer at (800) 667-3220, fill out an inquiry or check out the links below :
ADMET’s MTESTQuattro controller and software is our most popular and most advanced material testing system and is highly recommended for researchers who run complex tests. Pre-packaged or customer generated test procedures provide the capability to perform a variety of tests using the same testing system. ADMET will also develop custom test methods to meet your requirements.
Equipment often Selected for Material Research and Development
Fatigue Testing Machines
The eXpert 3910, 3930, 5950 and 9900 series table top dynamic testing machines are compact, quiet, and clean electro-dynamic testing systems for determining the durability of materials and components in tension, compression or flexure. All dynamic fatigue testing systems are equipped with the MTESTQuattro high-speed closed-loop controller.
eXpert 2600 Dual Column
The eXpert 2600 series universal testing machines are available in table top or floor standing configurations from 2 kN to 300 kN. The 2600 series testers tackle the toughest tests with their superior axial alignment, stiffness, and crosshead guidance. A simple yet customizable design allows for lower cost, faster delivery, and years of maintenance free operation.
BioTense Bioreactor
The BioTense Perfusion Bioreactor is an innovative instrument to help tissue engineers and cell biologists perform high resolution investigation in mechanobiology. Unique to the BioTense is its ability to apply mechanical stimulation and directly observe cell/matrix interaction at magnification over long periods of time. The Bioreactor sits atop the XYZ stage of an inverted microscope.
Material Research and Development Case Studies
One of ADMET’s customer, Nerites Corporation of Madison, Wisconsin, was founded in 2004 to develop novel adhesives and coatings for a wide range of medical, industrial and consumer applications although the majority of work focuses on structural adhesives and coatings for biomedical applications. Its innovative approach creates synthetic adhesives and coatings that mimic the binding proteins of the common blue mussel (Mytilus edulis). As Nerites’ material research progressed, it needed to test the adhesive properties of its MedhesiveTM product in wet (saline) environments that mimic conditions found in the human body. ADMET diagnosed, designed and delivered an eXpert 5602 universal testing machine in a horizontal configuration that could accommodate a saline bath. This accurate and flexible system fit the bill and positioned Nerites to successfully conduct their wide range of materials tests.
A Note from Richard Gedney, CEO and Founder
The ADMET story started over 33 years ago with the development of innovative materials testing software and controllers. These state of the art solutions were quickly adopted by testing machine builders and retrofitters making the company a leader in its industry. Building on it’s core strength of innovative software and hardware designs, ADMET began 20 years ago manufacturing its own line of robust, reliable, and accurate testing frames and systems.
Throughout that time, ADMET has sought out and formed relationships with leading universities, laboratories and companies which have challenged us to meet the needs of scientists and engineers developing new films, polymers, construction materials, composites, medical devices, tissue and more. The result has been an evolving line of innovative testing systems to meet your product development needs. If you are having a tough time finding a testing system to help advance your research, contact ADMET to see how we can help.
Benefit from our Experience
Material research and development professionals have worked with our engineers throughout various stages of product development. ADMET material testing machines have helped launch new products, secure patents and have been published in scientific journals. Our team also has experience with industry regulations such as FDA Title 21 CFR Part 11 requirements.
We offer lifetime technical and application support with our testing systems so you can make the most out of your investment.
By: Kevin Weiler | Published on: June 27, 2025 | Last Updated: January 22, 2026
Just Ask!
Our Engineers are Standing by to Help!
Contact ADMET today to discuss how we can improve your lab’s testing processes!
Buying Guides
Fatigue Testing Buying Guide
Not all fatigue testing systems are created equal. ADMET’s buying guide breaks down the critical specifications and features engineers need to evaluate before investing in a fatigue testing setup.Universal Testing Machines Buying Guide
Learn about the important factors to consider when selecting a universal testing machine for your mechanical testing needs.Material Testing Labs
ADMET offers testing machines and retrofits to help material testing labs expand their mechanical testing capabilities and meet client requirements.
