Bend fixtures are used to determine the flexural properties of rigid and semi-rigid materials. They are available in a variety of capacities, support diameter and widths, spans, and 3 or 4 point configurations. Choose a model based on the size of your samples and their strength.

FF-2.5T

FF-2.5T
  • Capacity: 2.5 kN
  • Maximum Span: 150mm
  • Support Width: 30mm
  • Upper Support Radius: 1, 1.5, 2, 3.2, or 5mm
  • Lower Support Radius: 1.5mm & 2.5mm, 2mm & 3mm, or 3.2mm & 5mm
  • Four Point Bend Configuration Available
  • Download FF-2.5T Datasheet

FF-10T

FF-10T
  • Capacity: 10kN
  • Maximum Span: 150 or 300mm
  • Support Width: 30mm
  • Upper Support Radius: 1, 1.5, 2, 3.2, or 5mm
  • Lower Support Radius: 1.5mm & 2.5mm, 2mm & 3mm, or 3.2mm & 5mm
  • Four Point Bend Option Available
  • Download FF-10T Datasheet

FF-50T

FF-50T
  • Capacity: 50kN
  • Lower Bar Length: 360, 500, 600, 700, 800, 900, 1000, 1100, or 1200mm
  • Support Width: 100mm
  • Upper Support Diameter: 10, 20, and 30mm
  • Lower Support Diameter: 10, 20, and 30mm
  • Four Point Bend Option Available
  • Download FF-50T Datasheet

FF-100T

FF-100T
  • Capacity: 100 kN
  • Lower Bar Length: 360, 500, 600, 700, 800, 900, 1000, 1100, or 1200mm
  • Support Width: 100mm
  • Upper Support Diameter: 10, 20, or 30mm
  • Lower Support Diameter: 10, 20, or 30mm
  • Four Point Bend Option Available
  • Download FF-100T Datasheet
Contact an Engineer!

Talk with our experts!

We'll help you find the right fixtures for your application.
Contact an Engineer!