Solid Ice Axial-Torsion Testing
A custom axial-torsion ADMET eXpert 8600 series testing machine was designed in collaboration with the Rock and Ice Deformation Laboratory (RIDL) at Woods Hole Oceanographic [...]
ADMET’s eXpert 8900 for Axial-Torsion Fatigue Testing
Our eXpert 8900 Dynamic Axial-Torsion Tester is an ideal solution for performing fatigue testing samples that require both an axial and torsional load. The 8600 [...]
ASTM F1717 Spinal Implant Construct Biaxial Testing
Spinal Implants are tested according to several ASTM standards. ASTM F1717 is intended to provide a basis for the mechanical comparison among past, present and future spinal implant assemblies. Three static and one fatigue mechanical test of...
Torsion Testing Conical Luer Fittings and Connectors for Medical Devices
eXpert 3600 Biaxial Testing Torque, also called moment or moment of force, is the tendency of a force to rotate an object about an axis or pivot. Torque is rotational force. Twisting the female to male fitting, to remove or replace ...
ISO 594/1 – Torsion Testing Equipment -Torque, Axial Load
ISO 594/1 describes dimensions, testing profile, and parameters for testing conical fittings with a 6% (luer) taper for hypodermic syringes, needles, and certain other medical equipment, such as transfusion and infusion sets. This standard covers rigid...
ASTM F1820 Testing System for strength of Modular Acetabular Shell and Liner
ASTM F1820- Determines the Axial Disassembly Force of a Modular Acetabular Device. Examples are Hip and Shoulder Prothetic Implants. These implants need to be tested in various ways. One way is to analyze the acetabular Liners attachment strength or ax...
Biaxial – torsion and tension universal testing machine
Biaxial - torsion and tension and compression universal testing example. There are many different products that require biaxial testing. Biaxial loading can be used to measure basic material properties and also the behavior of specific features of...
ASTM F2009-Testing Systems for Axial Disassembly Force of Taper
Tapers are used in modular devices, like shoulder and hip prothesis. This method assesses the axial locking forces of these tapers. Full description of ASTM F2009 can be found at www.astm.org. The ADMET eXpert 2600 will perform the Constant Rate Assemb...
For Axial-Torsion Fatigue Testing, ADMET Recommends the eXpert 8900 Series
The biomedical industry can rest assured that the biomaterials, bone screws, implants, and other medical devices developed within their field are tested rigorously and undergo [...]
Testing System for ASTM F2077-03 Intervertebral Body Fusion Device
ASTM F2077-03 is a standard test method for static and dynamic testing of intervertebral body fusion device assemblies. This test method will provide information to compare the mechanical characteristics of different assemblies for different spinal loc...