Knee Joint Prosthesis Mechanical Testing & Equipment
The knee is a complex hinge joint with ligaments that support the joint as bone surfaces glide with knee movements including back and forth, sideways, [...]
ASTM F543-A1 Bone Screw Torque Test
ASTM F543 Annex A1 is used to determine the Torsional Properties of Metallic Bone Screws. Â The results obtained from this test bear no direct correlation to the torque required to insert a bone screw in human or animal bone. This method is used as...
ASTM F543- A1 Metallic Bone Screw Test on 20Nm Torsion Tester
ASTM F543 Annex A1 is used to determine the Torsional Properties of Metallic Bone Screws. The results obtained from this test bear no direct correlation to the torque required to insert a bone screw in human or animal bone. This method is used as a qua...
ASTM F382-99 Metallic Bone Plate Plate 4 Point Bend Test
Metallic Bone Plates need to undergo several tests before gaining approval as internal fixation devices of the skeletal system. One standard, ASTM F382-99, defines the test methods for single cycle bend testing (annex A1) and for determining the bendin...
Testing Solutions for Medical Device Consultants
ADMET works with medical device manufacturers, test laboratories, as well as consultants for medical device companies to provide mechanical testing solutions. This case study covers [...]
Come See ADMET at the World Congress of Biomechanics in Boston, July 7-11
ADMET will be exhibiting at Booth 7 at the World Congress of Biomechanics in Boston.  The exhibit hall opens on July 7.  Account Director Vincent Milano will [...]
To Determine the Peel Strength of Medical Tape, ADMET Recommends eXpert 7601 Adhesive Testing System
Various medical and adhesive manufacturers follow ASTM and ISO testing standards before bringing surgical tape to market. The pressure-sensitive adhesive tape goes through a rigorous [...]
ADMET attending ASTM Symposia in Atlanta
ADMET will be attending a pair of ASTM symposia in Atlanta on November 13 and 14. Â Our Biomedical Sales Engineer, Vinny Milano, will be in [...]
BioTense Bioreactor used in Northeastern University Cornea Research
Northeastern University engineering professor Jeffrey Ruberti and his research colleagues are breaking new ground in the technique known as "hybrid tissue engineering" by attempting to control the behavior of human cells such that they can be induced t...
Pipette Tips: Determining Stiffness with a Bend Test
Pipette Tip Bend Test A pipette (also spelled pipet or pipettor) is used to aspirate and dispense fluids in wells for analysis and further testing. Â There are many types of piston pipettes, but all work on essentially the same principle;Â hand...