Introduction to the eXpert 81T Torsion Tester
In this video, ADMET founder and CEO Richard Gedney describes some of the features and capabilities of the eXpert 81T Torsion Tester. [...]
ADMET Torsion Testing Systems
Learn more about ADMET torsion testing solutions
Table Top Torque Testing Made Simple – Medical Device Testing
There are several ASTM and ISO specifications that require Torque Testing;ISO 594-1, ASTM F543, ASTM 2502, F1541, and A938. There are also many medical device companies that could use a torsion testing system for R&D and prototyping. Many time...
ISO 594/1 – Torsion Testing Equipment -Torque, Axial Load
ISO 594/1 describes dimensions, testing profile, and parameters for testing conical fittings with a 6% (luer) taper for hypodermic syringes, needles, and certain other medical equipment, such as transfusion and infusion sets. This standard covers rigid...
Torsion Fatigue Tester for Medical Device Testing
ADMET offers electromechanical and servo-hydraulic fatigue testing systems for tension, compression, torsion and biaxial testing applications. All systems are engineered to meet your needs (The eXpert 81T 30Nm Torsion Fatigue Tester shown in the ...
ASTM F543 Annex A2 Bone Screw Test on Vertical Torsion Tester
ASTM F543 Annex A2 is used to measure the torque required to drive a bone screw into a test block made of a rigid unicellular polyurethane foam. The results obtained from this test bear no direct correlation to the torque required to insert a bone scre...
ASTM F543- A1 Metallic Bone Screw test on 20Nm Torsion Tester
ASTM F543 Annex A1 is used to determine the Torsional Properties of Metallic Bone Screws. The results obtained from this test bear no direct correlation to the torque required to insert a bone screw in human or animal bone. This method is used as a qua...