ASTM F3014 | Surgical Needles | Puncture Testing
ASTM F3014 describes a position-control test method to quantify the resistance force required for a straight or curved surgical needle to consistently penetrate a medium multiple times. The ASTM F3014 standard test method enables manufacturers to evaluate the effectiveness of a surgical needle by quantifying the force required for a surgical needle to puncture a given tissue-like medium. The test procedure is repeated multiple times to measure needle durability during surgical procedures.
Before conducting ASTM F3014, it is important to read the entire specification in the relevant ASTM standard.
ASTM F3014 | Surgical Needles | Puncture Testing
- Utilize the appropriate equipment (static or torsional) to perform the testing procedure depending on whether the needle is curved or straight.
- Secure the needle into the appropriate needle-clamping fixture so that the needle doesn’t move.
- Check the needle before each puncture to make sure the needle is stable and positioned correctly.
- Confirm the entire length of the needle’s point passes through the medium perpendicular to the test medium at a uniform speed according to the standard’s guidelines.
- Refer to Table 1 within ASTM F3014 for curved needle’s testing ranges and Table 2 for straight needle’s testing ranges.
- Repeat the test procedure for the same needle at least 10 times.
Calculation:
- Penetration Force
ASTM F3014 | Surgical Needles | Puncture Testing
ASTM F3014 | Recommended Equipment |
---|---|
Testing System | |
Fixturing |
Ask our Engineers
Just have a quick question about running ASTM F3014 on your system?
We're happy to help!
Ask our Engineers